SKU 678187   3.78L
SKU 678186   946mls
SKU 678185   473mls

Enrich’N’Seal™ is a premium, no-sheen, enhancing sealer for stone, 100% polymer-solid with State-Of-The-Art Polycure™ Technology. It is a penetrating sealer formulated to darken, enrich, and highlight the character and beauty of unsealed natural stone. May also be used as a pre-grouting sealer. Allows moisture vapor transmission. It also effectively seals and darkens the color of grout joints. Formulated to provide maximum stain protection. Lasts up to 15 years.

Key Features:

•Rejuvenates the colour and improves the appearance of worn and weathered stone
•Maximum Stain Resistance
•State-Of-The-Art Polycure™ Technology
•May also be used as a pre-grouting sealer
•Does not alter the slip resistance of sealed surface
•Allows moisture-vapour transmission
•Low VOC
•Effectively seals and darkens the colour of grout joints
•Lasts up to 15 years

For use on:

Enrich’N’Seal is used as an enhancing sealer for all unsealed natural stone such as marble, granite, slate, limestone, travertine, quartzite. It also effectively seals and darkens the colour of grout joints. Effective for interior and exterior applications.

Sealer’s Choice® Gold – Rapid Cure is a premium grade, high performance penetrating / impregnating stone, tile & grout sealer. It is a low VOC, water-based sealer formulated to provide maximum stain protection, especially in food preparation and serving areas. Ideal for all interior and exterior natural stone, tile & grout surfaces. This premium sealer also includes built-in Microban® – Cured Sealant is Mould & Mildew Resistant, and this sealer lasts up to 15 years.

Key Features:

•Maximum stain protection
•May be used as a pre-grouting sealer
•Allows moisture vapour transmission
•The NEW Rapid Cure Formula protects in less than 4 hours
•Now with built-in Microban® – Cured Sealant is Mould & Mildew Resistant
•Safe to use, water-based low VOC formula
•Does not alter the slip resistance of the sealed surface
•Designed to achieve optimal penetration into dense, low-porosity surfaces
•Last up to 15 years

Suitable for use:

As a natural look sealer for all natural stone surfaces (such as sandstone, slate, quartz, marble, limestone, granite, bluestone / basalt) unglazed tiles, polished & unpolished porcelain tiles, clay pavers, polished & unpolished concrete, terrazzo, brick, grout, masonry, encaustic tiles, terracotta and grout. Suitable for both interior and exterior use.

[video width="1920" height="1080" mp4="http://www.tilersmate.co.nz/wp-content/uploads/2020/06/aqua-mix-sealers.mp4"][/video]