Sealer & Coating Remover is a non-flammable, multipurpose stripper formulated to stay wet longer which gives the product time to remove most sealers, epoxy grout haze, urethane coatings, synthetic finishes, adhesives and paints. Also dissolves deep-set oil stains and heavy grease build up.

Key Features:
•Effectively removes sealers, coatings and finishes
•Non acidic
•Long dwell time ideal for tough projects
•Cleans deep-set stains, epoxy grout haze, adhesives and paint

For use on:
Natural stone (such as granite, limestone, marble, slate, and travertine), ceramic, porcelain, grout, quarry, Saltillo, terra-cotta, cement pavers and masonry surfaces.

[video width="1920" height="1080" mp4="http://www.tilersmate.co.nz/wp-content/uploads/2020/06/Grout-Haze.mp4"][/video]

Aqua Mix® Grout Sealer is an easy to use premium, no sheen, natural look, water-based sealer that resists water, oil, and acid-based contaminants.

Key Features:

•Dual Protection – Penetrates & Coats
•Water based, non VOC formula
•Repels Food, Dirt & Grease
•Maximum Stain Protection
•Inhibits Mildew & Bacteria
•Simplifies Maintenance
•Allows moisture vapor transmission
•Last up to 5 years

For use on:

As a sealer for cement based sanded and unsanded porous grout joints for ceramic, porcelain and glass tile installations. Effective for internal and external use.

A granular sulfamic acid to be dissolved in water. Removes grout and mortar haze, rust and mineral deposits including efflorescence.

Key Features:
•Removes cured grout and mortar haze.
•Dissolves rust stains, efflorescence and other mineral deposits.

For use on:

Acid resistant natural stone such as granite and slate, ceramic, porcelain, quarry and grout.

SKU 678228   473mls

Grout Haze Clean-Up is a safe and effective concentrated cleaner that is added to the grout clean-up water for removal of cementitious grout haze and latex additive film from tile during the grout clean-up process. It may also be used full-strength to remove light grout residue within the first 10 days after grouting.

Key Features:
•Just pour in cleanup water
•Removes grout haze and latex additive film
•Non-acidic formula

For use on:
Unpolished natural stone (such as granite, limestone, marble, slate, and travertine), polished granite and slate, ceramic, porcelain, quarry, Saltillo, terra-cotta, cement pavers, masonry surfaces, and other stone and tile surfaces.

[video width="1920" height="1080" mp4="http://www.tilersmate.co.nz/wp-content/uploads/2020/06/Grout-Haze-Clean-up.mp4"][/video]

SKU 678218   946mls

Cement Grout Haze Remover is an organic acidic treatment designed to remove cementitious grout haze, mineral deposits, rust stains, mortar smears, and efflorescence. Effective for the removal of most hard water stains, lime deposits, and soap scum. Also removes cement grout and mortar residue from tile, concrete, and masonry. Etches concrete. No phosphates.

Key Features:

•Removes cured grout haze and mortar smears
•Cleans hard water stains, rust and soap scum
•Dissolves efflorescence
•Contains no phosphates
•Easy-to-use acidic treatment

For use on:

Acid resistant natural stone (such as granite and slate), ceramic, porcelain, quarry, Saltillo, terracotta, and other acid resistant tiles.

Grout Release is a temporary, water soluble, pre-grout coating. It provides protection against grout and mortar staining and eases grout cleanup. Ideal for porous textured material such as; Sandstone, concrete pavers & bricks.

Key Features:

•Temporary, water-soluble pre-grout coating
•Provides protection against grout & mortar staining
•Installation aid simplifies cleanup

For use on:

Porous textured surfaces such as; natural stone, concrete pavers, masonry surfaces, ceramic, porcelain, quarry, saltillo, terra-cotta

NanoScrub® Tile Cleaner is an abrasive cream cleaner designed to work where other cleaners won’t. It utilizes Nano-sized particles to penetrate into small surface pores where it can effectively work to remove surface stains and residues. An effective Tile Cleaner for all stone and tile surfaces. Also removes factory applied waxes and floor finishes, coating sealers, light grout residue (including epoxy), rubber and pencil marks, light mineral deposits, ground ­in dirt and most sealer residues. Ideal for cleaning porcelain tiles.

Key Features:
•Dissolves ground in dirt from textured surfaces
•Removes factory applied waxes and floor finishes
•NanoScrub® is non-acidic and non-flammable
•Breakthrough NanoSTG™ technology

For use on:
As a cleaner for porcelain tiles, ceramic, polished and unpolished natural stone (such as granite, limestone, marble, slate, and travertine), grout, quarry, saltillo, terra-cotta, cement pavers, masonry surfaces, and other stone, tile and grout surfaces.

[video width="1920" height="1080" mp4="http://www.tilersmate.co.nz/wp-content/uploads/2020/06/Nano-scrub.mp4"][/video]

Aqua Mix® Heavy-Duty Tile & Grout Cleaner is a concentrated, high-alkaline cleaner and degreaser. It effectively removes grease, soap scum and other organic materials from areas that have been neglected or subjected to heavy use. Specially formulated to strip off synthetic and acrylic waxes and floor finishes. Ideal for stone, tile & grout with a heavy build-up of grease, dirt & grime. Ideal for use on natural stone, tile & grout.

Key Features:
•For heavily soiled and neglected areas
•Cleans ground-in dirt, grease, soap scum, and other organic materials
•Safe Non-acidic formula
•Strips wax and floor finishes

For use on:

Polished & unpolished porcelain tiles, grout, ceramic, natural stone (such as granite, limestone, slate and travertine), ceramic, quarry, saltillo, terra-cotta, cement pavers, masonry surfaces, linoleum or resilient flooring.

Aqua Mix® Concentrated Stone & Tile Cleaner is a super-concentrated routine cleaner formulated for everyday use. This pH neutral cleaner, when used regularly, prevents soap scum build-up and hard water deposits. Leaves a room smelling clean and fresh. The ideal cleaner for maintaining all natural stone, tile & grout surfaces.

Key Features:

•Ideal for everyday use
•Concentrated-makes up to 128 gallons (484 L) per 946ml
•Neutral pH formula
•Biodegradable formula
•Perfect for maintaining sealed stone & tile surfaces

For use on:

All polished & unpolished natural stone (such as granite, limestone, marble, slate, and travertine), ceramic, porcelain, grout, quarry, Saltillo, terra-cotta, cement pavers, masonry surfaces, and other water-safe surfaces. Sealed & unsealed surfaces.

Floor Shine & Hardener gives a clear, durable floor finish that resists surface abuse and leaves a beautiful high-sheen finish. May also be used for pre-grouting protection on unglazed porcelain and crackled glazes.

Key Features:

•Protective finish over sealed surfaces
•Allows moisture vapor transmission
•Safe to use, low odour, low VOC
•No buffing required
•Water based
•Last up to 1 years

For use on:

Sealed Saltillo, terra-cotta and adobe, quarry, slate and sandstone. Internal dry areas use only.